<%NUMBERING1%>.<%NUMBERING2%>.<%NUMBERING3%> PRTG Manual: SNMP NetApp System Health Sensor

The SNMP NetApp System Health sensor monitors the status of a NetApp storage system via the Simple Network Management Protocol (SNMP).

SNMP NetApp System Health Sensor

For a detailed list and descriptions of the channels that this sensor can show, see section Channel List.

Sensor in Other Languages

Dutch: SNMP NetApp Systeemstatus
French: NetApp état du système (SNMP)
German: SNMP NetApp Systemzustand
Japanese: SNMP NetApp システム正常性
Portuguese: Saúde do sistema NetApp (SNMP)
Russian: Работоспособность системы NetApp по SNMP
Simplified Chinese: SNMP NetApp 系统健康状况
Spanish: Salud de sistema NetApp (SNMP)

Remarks

Consider the following remarks and requirements for this sensor:

Remark	Description
IPv6	This sensor supports IPv6.
Performance impact	This sensor has a very low performance impact.
Limits	This sensor has predefined limits for several metrics.
NetApp System Health	If you use NetApp cDOT 8.3 or NetApp ONTAP as of version 9.0 or later, we recommend that you use the NetApp System Health sensor.

Basic Sensor Settings

The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:

netapp
snmpnetapp
snmpnetappsystemhealthsensor

For more information about basic sensor settings, see section Sensor Settings.

Sensor Display

Setting	Description
Primary Channel	Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor. You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.
Graph Type	Define how this sensor shows different channels: Show channels independently (default): Show a graph for each channel. Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic. You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).
Stack Unit	This setting is only visible if you select Stack channels on top of each other above. Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Setting

Description

Primary Channel

Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor.

You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.

Graph Type

Define how this sensor shows different channels:

Show channels independently (default): Show a graph for each channel.
Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic.
You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).

Stack Unit

This setting is only visible if you select Stack channels on top of each other above.

Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Inherited Settings

By default, all of these settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if necessary. To change a setting for this object only, click under the corresponding setting name to disable the inheritance and to display its options.

For more information, see section Inheritance of Settings.

Channel List

Which channels the sensor actually shows might depend on the target device, the available components, and the sensor setup.

Channel	Description
CPU Load	The CPU load (%)
Disks Active	The number of active disks
Disks Being Added	The number of disks being added
Disks Being Scrubbed	The number of disks being scrubbed
Disks Failed	The number of failed disks This channel has a default limit: Upper error limit: 0
Disks Failing Soon	The number of disks that will fail soon This channel has a default limit: Upper error limit: 0
Disks Out Of Date	The number of disks that are out of date This channel has a default limit: Upper error limit: 0
Disks Reconstructing	The number of disks that are reconstructing
Disks Reconstructing Parity	The number of disks that are reconstructing parity
Disks Spare	The number of spare disks This channel has default limits: Lower error limit 1 Lower warning limit: 2
Disks Total	The total number of disks This channel is the primary channel by default.
Disks Verifying Parity	The number of disks that are verifying parity
Downtime	In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status

KNOWLEDGE BASE

What security features does PRTG include?

https://kb.paessler.com/en/topic/61108

My SNMP sensors don’t work. What can I do?

https://kb.paessler.com/en/topic/46863